74ALVT162244DGG ,2.5V/3.3V 16-bit buffer/driver with 30ohm termination resistors 3-Stateapplications such as memory address drivers, clock drivers,• TTL input and output switching levelsa ..
74ALVT162245DL ,2.5V/3.3V ALVT 16-bit transceiver with 30ohm termination resistors 3-Stateapplications such as memory address drivers, clock drivers,• Outputs include series resistance of 3 ..
74ALVT162245DL ,2.5V/3.3V ALVT 16-bit transceiver with 30ohm termination resistors 3-StateFEATURES DESCRIPTIONThe 74ALVT162245 is a high-performance BiCMOS product• 16-bit bidirectional bus ..
74ALVT162344DL ,2.5V/3.3V 1-to-4 address driver with 30ohm termination resistors 3-State
74ALVT162344DL ,2.5V/3.3V 1-to-4 address driver with 30ohm termination resistors 3-State
74ALVT16240DGG ,16-bit inverting buffer/driver; 3-stateFEATURES DESCRIPTIONThe 74ALVT16240 is a high-performance BiCMOS product• 16-bit bus interfacedesig ..
74HC563N ,74HC/HCT563; Octal D-type transparent latch; 3-state; invertingINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74HC564D ,Octal D-type flip-flop; positive-edge trigger; 3-state; inverting
74HC564N ,Octal D-type flip-flop; positive-edge trigger; 3-state; inverting
74HC564N ,Octal D-type flip-flop; positive-edge trigger; 3-state; invertingapplications. A clock (CP) and an outputenable (OE) input are common to all flip-flops.The 8 flip-flops ..
74HC573BQ ,74HC/HCT573; Octal D-type transparent latch; 3-stateapplications.the high impedance OFF-state.and “373”A latch enable (LE) input and anOperation of the ..
74HC573D ,Octal D-type transparent latch; 3-stateINTEGRATED CIRCUITSDATA SHEETFor a complete data sheet, please also download:• The IC06 74HC/HCT/HC ..
74ALVT162244DGG
2.5V/3.3V 16-bit buffer/driver with 30ohm termination resistors 3-State
Product specification
Supersedes data of 1998 Feb 13
IC23 Data Handbook
1998 Oct 07
Philips Semiconductors Product specification
74ALVT1622442.5V/3.3V 16-bit buffer/driver with
30Ω termination resistors (3-State)
FEATURES 16-bit bus interface 3-State buffers 5V I/O compatibile Output capability: +12mA/-12mA TTL input and output switching levels Input and output interface capability to systems at 5V supply Bus-hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs Live insertion/extraction permitted Outputs include series resistance of 30Ω making external
terminating resistors unnecessary Power-up 3-State No bus current loading when output is tied to 5V bus Latch-up protection exceeds 500mA per JEDEC Std 17 ESD protection exceeds 2000V per MIL STD 883 Method 3015
and 200V per Machine Model
DESCRIPTIONThe 74ALVT162244 is a high-performance BiCMOS product
designed for VCC operation at 2.5V or 3.3V with I/O compatibility up
to 5V.
The 74ALVT162244 is designed with 30Ω series resistance in both
the High and Low states of the output. This design reduces line
noise in applications such as memory address drivers, clock drivers,
and bus receivers/transmitters.
This device is a 16-bit buffer and line driver featuring non-inverting
3-State bus outputs. The device can be used as four 4-bit buffers,
two 8-bit buffers, or one 16-bit buffer.
QUICK REFERENCE DATA
ORDERING INFORMATION
LOGIC SYMBOL
PIN DESCRIPTION
Philips Semiconductors Product specification
74ALVT1622442.5V/3.3V 16-bit buffer/driver with
30Ω termination resistors (3-State)
LOGIC SYMBOL (IEEE/IEC)
SCHEMATIC OF EACH OUTPUT
PIN CONFIGURATION
FUNCTION TABLEH = High voltage level
L = Low voltage level
X = Don’t care
Z = High Impedance “off” state
Philips Semiconductors Product specification
74ALVT1622442.5V/3.3V 16-bit buffer/driver with
30Ω termination resistors (3-State)
ABSOLUTE MAXIMUM RATINGS1, 2
NOTES: Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
Philips Semiconductors Product specification
74ALVT1622442.5V/3.3V 16-bit buffer/driver with
30Ω termination resistors (3-State)
DC ELECTRICAL CHARACTERISTICS (3.3V 0.3V RANGE)
NOTES: All typical values are at VCC = 3.3V and Tamb = 25°C. This is the increase in supply current for each input at the specified voltage level other than VCC or GND This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 3.3V ± 0.3V a
transition time of 100μsec is permitted. This parameter is valid for Tamb = 25°C only. Unused pins at VCC or GND. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. This is the bus hold overdrive current required to force the input to the opposite logic state.
AC CHARACTERISTICS (3.3V 0.3V RANGE)GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; Tamb = –40°C to +85°C.
NOTE: All typical values are at VCC = 3.3V and Tamb = 25°C.
Philips Semiconductors Product specification
74ALVT1622442.5V/3.3V 16-bit buffer/driver with
30Ω termination resistors (3-State)
DC ELECTRICAL CHARACTERISTICS (2.5V 0.2V RANGE)
NOTES: All typical values are at VCC = 2.5V and Tamb = 25°C. This is the increase in supply current for each input at the specified voltage level other than VCC or GND This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 2.5V ± 0.2V a
transition time of 100μsec is permitted. This parameter is valid for Tamb = 25°C only. Unused pins at VCC or GND. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. Not guaranteed.
AC CHARACTERISTICS (2.5V 0.2V RANGE)GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; Tamb = –40°C to +85°C.
NOTE: All typical values are at VCC = 2.5V and Tamb = 25°C.
