BGC405 Fast Delivery |IC PHOENIX CO.,LIMITED

Home › B › B19 > BGC405,Active Biased RF Transistor (RF MMIC)

If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email

Partno	Mfg	Dc	Qty	Available	Descript
BGC405	INFINEON	N/a	19000	avai	Active Biased RF Transistor (RF MMIC)

BGC405 ,Active Biased RF Transistor (RF MMIC)BGC405Self-Biased BFP40556

BGC405
Active Biased RF Transistor (RF MMIC)
Description
The BGC405 is a silicon self biased RF Transistor (Q1). It offers an adjustable collector current
nearly independent from device voltage in the range from 2.0V to 4.5V. Additionally a control pin
(Vc) for switching the device off is provided. The collector current can be adjusted by connecting a
resistor (Rx) between Vcc and Vr.
Self-Biased BFP405 SIEGET25- Technology Small SCT598-PackageControl Pin For Switching The Device OffCurrent Easy Adjustable By An External ResistorVoltage Independent Current (2V – 4.5V)
ESD: Electrostatic discharge sensitive device, observe
handling precautions!
Pin Connections, SCT598
Vr,5
RFout,6
GND,7
Vc, 8
4,Vcc
3, Vb
2, GND
1,RFin
Note: Top View
VPW059823
Maximum Ratings
Thermal Resistance
1)TS is measured on the Ground lead at the soldering point to the pcb.
Electrical Specifications (Measured in Test Fixture applying the circuit specified in Figure 1
with Rx=82Ω), Tc=25°C, Vcc=3V, ICC≈7mA unless noted A positive sign denotes a current flowing form the Pin to the external circuit. This values are valid for C2=1nF, C3=100pF and 220pF Coupling capacitors at RFin and RFout.
Power Gain
versus Frequency
Vcc=3V, Icc=5mA
Gma
Gms
S212
GHz
Icc
Gma
Gms
Power Gain
versus Device Current
Vcc=3V
S212
S212
versus Frequency and Temperature
Vcc=3V, Icc=7mA
GHz
0.2 0.6 1 1.4 1.8 2.2 2.6 30.1110468101214
Icc
Vcc
Device Current
versus Rx and Temperature
Vcc=3V3
Device Current
versus Voltage at Vc
Vcc=3V; Rx=82Ω
Icc
VVc1234
Device Current
versus Device Voltage250450650
Icc
Typical Application
Remarks:
1) To provide low frequency stability C2 should be 10 times C3.
2) Be aware that also coupling capacitors determine the switching times.
3) The collector current at Q1 can be estimated by Ic=0.6V / Rx[Ω].Place C2 as close to the device as possible.
Vc,8Vb,3off
C2, 1nF
3V,
DC
C4,150pFC5,100nF
Rx = 82Ohm for Icc=7.2mA
Figure 1. Typical Application and Internal Circuit
Layout Proposal
Part List for Vcc=3V, ICC≈7mA
This proposal demonstrates how to use the BGC405 as a Self-Biased Transistor. As for a discrete Transistor
matching circuits have to be applied. A good starting point for various applications are the Application Notes
provided for the BFP405.

TEL:86-533-2716050 FAX:86-533-2716790