PEMB1 ,PNP resistor-equipped transistors R1 = 22kOhm/R2 = 22kOhmLIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).SYMBOL PARAMETER C ..
PEMB13 ,PNP/PNP resistor-equipped transistors; R1 = 4.7 k惟, R2 = 47 k惟
PEMB18 ,PEMB18; PUMB18; PNP/PNP resistor-equipped transistors; R1 = 4.7 kOhm, R2 = 10 kOhmapplications1.4 Quick reference dataTable 2: Quick reference dataSymbol Parameter Conditions Min Ty ..
PEMB19 ,PNP/PNP resistor-equipped transistors; R1 = 22 kOhm, R2 = openapplications1.4 Quick reference dataTable 2: Quick reference dataSymbol Parameter Conditions Min Ty ..
PEMB3 ,PNP resistor-equipped double transistor R1 = 4.7 kOhm, R2 = openLIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).SYMBOL PARAMETER C ..
PEMB30 ,PNP/PNP double resistor-equipped transistors; R1 = 2.2 kOhm, R2 = openApplicationsn Low current peripheral driver n Cost-saving alternative for BC857BSand BC857BVn Contr ..
PIC7516 , Semiconductor Devices, Silicon hybrid Switching Regulators High Reliability Types
PIC7516 , Semiconductor Devices, Silicon hybrid Switching Regulators High Reliability Types
PIMD2 ,NPN/PNP resistor-equipped transistors; R1 = 22 k惟, R2 = 22 k惟General descriptionNPN/PNP double Resistor-Equipped Transistors (RET) in Surface-Mounted Device (SM ..
PIMD3 ,PEMD3; PIMD3; PUMD3; NPN/PNP resistor-equipped transistors; R1 = 10 kOhm, R2 = 10 kOhmFeatures and benefits 100 mA output current capability Reduces component count Built-in bias re ..
PIMH9 ,R1 = 10 kOhm, R2 = 47 kOhmLIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).SYMBOL PARAMETER C ..
PIMN31 ,500 mA, 50 V NPN/NPN double resistor-equipped transistor; R1 = 1 kOhm, R2 = 10 kOhmApplicationsn Digital application in automotive and industrial segmentsn Switching loads1.4 Quick r ..
PEMB1
PNP resistor-equipped transistors R1 = 22kOhm/R2 = 22kOhm
Philips Semiconductors Preliminary specification
PNP resistor-equipped transistors;
R1 = 22 kΩ , R2 = 22 kΩ PEMB1
FEATURES 300 mW total power dissipation Very small 1.6 mmx 1.2 mm ultra thin package Excellent coplanarity due to straight leads Replaces two SC-75/SC-89 packaged transistors on
same PCB area Reduces required PCB area Reduced pick and place costs.
APPLICATIONS General purpose switching and amplification Inverter and interface circuits Circuit driver.
DESCRIPTIONPNP resistor-equipped transistors in a SOT666 plastic
package.
MARKING
PINNING
QUICK REFERENCE DATA
Philips Semiconductors Preliminary specification
PNP resistor-equipped transistors;
R1 = 22 kΩ, R2 = 22 kΩ PEMB1
LIMITING VALUESIn accordance with the Absolute Maximum Rating System (IEC 60134).
Note Transistor mounted on a FR4 printed-circuit board.
THERMAL CHARACTERISTICS
Notes Transistor mounted on an FR4 printed-circuit board. The only recommended soldering method is reflow soldering.
Philips Semiconductors Preliminary specification
PNP resistor-equipped transistors;
R1 = 22 kΩ, R2 = 22 kΩ PEMB1
CHARACTERISTICSTamb =25 °C unless otherwise specified.
Philips Semiconductors Preliminary specification
PNP resistor-equipped transistors;
R1 = 22 kΩ, R2 = 22 kΩ PEMB1
PACKAGE OUTLINE
Plastic surface mounted package; 6 leads SOT666
Philips Semiconductors Preliminary specification
PNP resistor-equipped transistors;
R1 = 22 kΩ, R2 = 22 kΩ PEMB1
DATA SHEET STATUS
Notes Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL .
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given arein
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device theseorat any other conditions abovethosegivenin the
Characteristics sectionsof the specificationis not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make representationor warranty thatsuch applications willbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonablybe expectedto resultin personal injury. Philips
Semiconductors customers usingor selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the rightto make changes, without notice,in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
the useof anyof these products, conveysno licence ortitle
under any patent, copyright, or mask work right to these
products, and makesno representationsor warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
