SN74ABTH162260DL ,12-Bit to 24-Bit Multiplexed D-Type Latches With Series-Damping Resistors And 3-State Outputsmaximum ratings over operating free-air temperature range (unless otherwise noted)Supply voltage ra ..
SN74ABTH162260DLR ,12-Bit to 24-Bit Multiplexed D-Type Latches With Series-Damping Resistors And 3-State Outputs SN54ABTH162260, SN74ABTH162260 12-BIT TO 24-BIT MULTIPLEXED D-TYPE LATCHESWITH SERIES-DAMPING RESI ..
SN74ABTH16244DGGR ,16-Bit Buffers/Drivers With 3-State Outputsmaximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
SN74ABTH16244DL ,16-Bit Buffers/Drivers With 3-State Outputsmaximum ratings over operating free-air temperature range (unless otherwise noted)Supply voltage ra ..
SN74ABTH16245DGGR ,16-Bit Bus Transceivers With 3-State Outputsmaximum ratings” may cause permanent damage to the device. These are stress ratings only, andfuncti ..
SN74ABTH16245DL ,16-Bit Bus Transceivers With 3-State Outputsmaximum ratings over operating free-air temperature range (unless otherwise noted)Supply voltage ra ..
SN74LS161N ,BCD DECADE COUNTERS/ 4-BIT BINARY COUNTERSSN54/74LS160ASN54/74LS161ASN54/74LS162ABCD DECADE COUNTERS/SN54/74LS163A4-BIT BINARY COUNTERSThe LS ..
SN74LS161N ,BCD DECADE COUNTERS/ 4-BIT BINARY COUNTERSSN54/74LS160ASN54/74LS161ASN54/74LS162ABCD DECADE COUNTERS/SN54/74LS163A4-BIT BINARY COUNTERSThe LS ..
SN74LS162AN ,BCD decade counter/4-bit binary counterSN54/74LS160ASN54/74LS161ASN54/74LS162ABCD DECADE COUNTERS/SN54/74LS163A4-BIT BINARY COUNTERSThe LS ..
SN74LS162N ,BCD DECADE COUNTERS/ 4-BIT BINARY COUNTERSSN54/74LS160ASN54/74LS161ASN54/74LS162ABCD DECADE COUNTERS/SN54/74LS163A4-BIT BINARY COUNTERSThe LS ..
SN74LS163AD ,BCD decade counter/4-bit binary counter
SN74LS163ADR ,Synchronous 4-Bit Binary Counters
SN74ABTH162260DL-SN74ABTH162260DLR
12-Bit to 24-Bit Multiplexed D-Type Latches With Series-Damping Resistors And 3-State Outputs
State-of-the-Art EPIC-II B BiCMOS DesignSignificantly Reduces Power Dissipation ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0) Latch-Up Performance Exceeds 500 mA Per
JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce)
< 1 V at VCC = 5 V, TA = 25°C High-Impedance State During Power Up
and Power Down Distributed VCC and GND Pin Configuration
Minimizes High-Speed Switching Noise Flow-Through Architecture Optimizes PCB
Layout Bus Hold on Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors Package Options Include Plastic 300-mil
Shrink Small-Outline (DL) Package and
380-mil Fine-Pitch Ceramic Flat (WD)
Package Using 25-mil Center-to-Center
Spacings
descriptionThe ’ABTH162260 are 12-bit to 24-bit multiplexed D-type latches used in applications where two separate data
paths must be multiplexed onto, or demultiplexed from, a single data path. Typical applications include
multiplexing and/or demultiplexing of address and data information in microprocessor or bus-interface
applications. These devices are also useful in memory-interleaving applications.
Three 12-bit I/O ports (A1–A12, 1B1–1B12, and 2B1–2B12) are available for address and/or data transfer. The
output-enable (OE1B, OE2B, and OEA) inputs control the bus-transceiver functions. The OE1B and OE2B
control signals also allow bank control in the A-to-B direction.
Address and/or data information can be stored using the internal storage latches. The latch-enable (LE1B,
LE2B, LEA1B, and LEA2B) inputs are used to control data storage. When the latch-enable input is high, the
latch is transparent. When the latch-enable input goes low, the data present at the inputs is latched and remains
latched until the latch-enable input is returned high.
The B-port outputs, which are designed to sink up to 12 mA, include equivalent 25-W series resistors to reduce
overshoot and undershoot.
2B3
GND
2B2
2B1CC
GND
GND
A10
A11
A12
VCC
1B1
1B2
GND
1B3
LE2B
SEL
2B4
GND
2B5
2B6CC
2B7
2B8
2B9
GND
2B10
2B11
2B12
1B12
1B11
1B10
GND
1B9
1B8
1B7
VCC
1B6
1B5
GND
1B4
LEA1B
OE1B
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
