IC Phoenix
 
Home ›  CC3 > CAT1025,Supervisory Circuit with I2C Serial 2K CMOS EEPROM, Manual Reset, WP Pin, Active High & Low Reset
CAT1025 Fast Delivery,Good Price
Part Number:
If you need More Quantity or Better Price,Welcom Any inquiry.
We available via phone +865332716050 Email
Partno Mfg Dc Qty AvailableDescript
CAT1025ICSIN/a20avaiSupervisory Circuit with I2C Serial 2K CMOS EEPROM, Manual Reset, WP Pin, Active High & Low Reset


CAT1025 ,Supervisory Circuit with I2C Serial 2K CMOS EEPROM, Manual Reset, WP Pin, Active High & Low ResetBLOCK DIAGRAM THRESHOLD VOLTAGE OPTION EXTERNA L LOADPart Dash Minimum Maximum SENSEAMPS Number Thr ..
CAT1025WI-30-GT3 , Supervisory Circuits with I2C Serial 2k-bit CMOS EEPROM and Manual Reset
CAT102TDI-G , Precision, Adjustable Shunt Regulator (600 mV Reference)
CAT1161J-42 , Supervisory Circuits with I2C Serial CMOS EEPROM, Precision Reset Controller
CAT1161J-42 , Supervisory Circuits with I2C Serial CMOS EEPROM, Precision Reset Controller
CAT1161J-42 , Supervisory Circuits with I2C Serial CMOS EEPROM, Precision Reset Controller
CD4528 ,Dual Monostable MultivibratorFeaturesThe CD4528B is a dual monostable multivibrator. Each

CAT1025
Supervisory Circuit with I2C Serial 2K CMOS EEPROM, Manual Reset, WP Pin, Active High & Low Reset
CAT1024, CAT1025
Supervisory Circuits with I2 C Serial 2k-bit CMOS EEPROM and Manual Reset
FEATURES
Precision Power Supply Voltage Monitor — 5 V, 3.3 V and 3 V systems — Five threshold voltage options Active High or Low Reset — Valid reset guaranteed at VCC = 1 V 400 kHz I2 C Bus 2.7 V to 5.5 V Operation Low power CMOS technology 16-Byte Page Write Buffer Built-in inadvertent write protection — WP pin (CAT1025) 1,000,000 Program/Erase cycles Manual Reset Input 100 year data retention Industrial and extended temperature ranges Green packages available with NiPdAu Lead
finished

DESCRIPTION

The CAT1024 and CAT1025 are complete memory
and supervisory solutions for microcontroller-based
systems. A 2k-bit serial EEPROM memory and a
system power supervisor with brown-out protection
are integrated together in low power CMOS techno–
logy. Memory interface is via a 400 kHz I2 C bus.
The CAT1025 provides a precision VCC sense circuit
and two open drain outputs: one (RESET) drives high
and the other (RESET ¯¯¯¯¯¯) drives low whenever VCC falls
below the reset threshold voltage. The CAT1025 also
has a Write Protect input (WP). Write operations are
disabled if WP is connected to a logic high.
The CAT1024 also provides a precision VCC sense
circuit, but has only a RESET ¯¯¯¯¯¯ output and does not
have a Write Protect input.
The power supply monitor and reset circuit protect
memory and system controllers during power up/down
and against brownout conditions. Five reset threshold
voltages support 5 V, 3.3 V and 3 V systems. If power
supply voltages are out of tolerance reset signals
become active, preventing the system microcontroller,
ASIC or peripherals from operating. Reset signals
become inactive typically 200 ms after the supply
voltage exceeds the reset threshold level. With both
active high and low reset signals, interface to
microcontrollers and other ICs is simple. In addition,
the RESET ¯¯¯¯¯¯ pin or a separate input, MR ¯¯¯, can be used
as an input for push-button manual reset capability.
The CAT1024/25 memory features a 16-byte page. In
addition, hardware data protection is provided by a
VCC sense circuit that prevents writes to memory
whenever VCC falls below the reset threshold or until
VCC reaches the reset threshold during power up.
Available packages include an 8-pin PDIP and a
surface mount 8-pin SO, 8-pin TSSOP, 8-pin TDFN
and 8-pin MSOP packages. The TDFN package thick-
ness is 0.8 mm maximum. TDFN footprint is 3 x 3 mm.
ic,good price


TEL:86-533-2716050      FAX:86-533-2716790
   

©2020 IC PHOENIX CO.,LIMITED