IC Phoenix logo

Home ›  7  › 719 > 74LCX16841MTD

74LCX16841MTD from FSC,Fairchild Semiconductor

Fast Delivery, Competitive Price @IC-phoenix

If you need more electronic components or better pricing, we welcome any inquiry.

74LCX16841MTD

Manufacturer: FSC, FAI

Low Voltage 20-Bit Transparent Latch with 5V Tolerant Inputs and Outputs

Partnumber Manufacturer Quantity Availability
74LCX16841MTD FSC, FAI 1626 In Stock

Description and Introduction

Low Voltage 20-Bit Transparent Latch with 5V Tolerant Inputs and Outputs The 74LCX16841MTD is a low-voltage CMOS 20-bit bus interface flip-flop with 5V tolerant inputs and outputs. It is manufactured by Fairchild Semiconductor (now part of ON Semiconductor). The device operates with a supply voltage range of 2.0V to 3.6V, making it suitable for low-power applications. It features 20-bit D-type flip-flops with 3-state outputs and is designed for high-speed operation with propagation delays typically less than 5.5 ns. The 74LCX16841MTD is available in a TSSOP (Thin Shrink Small Outline Package) with 56 pins. It is RoHS compliant and has a wide operating temperature range of -40°C to +85°C. The device is commonly used in applications requiring high-speed data transfer and bus interfacing in low-voltage systems.

Application Scenarios & Design Considerations

Low Voltage 20-Bit Transparent Latch with 5V Tolerant Inputs and Outputs# Technical Documentation: 74LCX16841MTD 20-Bit Universal Bus Driver

 Manufacturer : FSC (Fairchild Semiconductor)

## 1. Application Scenarios

### Typical Use Cases
The 74LCX16841MTD serves as a  20-bit universal bus driver  with 3-state outputs, primarily functioning as:

-  Bus interface buffer  between microprocessors and peripheral devices
-  Data bus isolation  in multi-master systems
-  Signal level translation  between 3.3V and 5V systems
-  Output expansion  for microcontroller port limitations
-  Memory address/data line drivers  in embedded systems

### Industry Applications
 Computing Systems: 
- Server backplanes and motherboard data paths
- Network interface card (NIC) buffer circuits
- Storage area network (SAN) equipment

 Telecommunications: 
- Base station control logic
- Router and switch fabric interfaces
- VoIP gateway systems

 Industrial Automation: 
- PLC I/O expansion modules
- Motor control interface circuits
- Sensor data acquisition systems

 Consumer Electronics: 
- Set-top box processor interfaces
- Gaming console memory subsystems
- High-end audio/video processing equipment

### Practical Advantages and Limitations

 Advantages: 
-  Low power consumption : 10μA ICC typical (static)
-  High-speed operation : 4.5ns maximum propagation delay
-  5V-tolerant inputs : Compatible with mixed-voltage systems
-  Live insertion capability : Supports hot-swapping applications
-  Bus-hold circuitry : Eliminates need for external pull-up/pull-down resistors

 Limitations: 
-  Limited drive capability : ±24mA output current may require buffers for high-load applications
-  Temperature constraints : Commercial temperature range (0°C to +70°C)
-  ESD sensitivity : Requires standard ESD precautions during handling
-  Package limitations : TSSOP-56 package may require careful PCB design for thermal management

## 2. Design Considerations

### Common Design Pitfalls and Solutions

 Power Supply Sequencing: 
-  Pitfall : Simultaneous power-up causing latch-up conditions
-  Solution : Implement controlled power sequencing with monitoring circuitry

 Signal Integrity Issues: 
-  Pitfall : Ringing and overshoot on high-speed signals
-  Solution : Add series termination resistors (22-33Ω) near driver outputs

 Simultaneous Switching Noise: 
-  Pitfall : Ground bounce affecting signal integrity
-  Solution : Use multiple ground pins with proper decoupling

### Compatibility Issues

 Mixed Voltage Systems: 
- Inputs accept 5V signals when VCC = 3.3V
- Outputs compatible with both 3.3V and 5V systems
- Ensure proper level shifting for timing-critical applications

 Timing Constraints: 
- Setup and hold times must be respected in synchronous systems
- Clock-to-output delays may affect system timing margins
- Consider propagation delays in critical timing paths

### PCB Layout Recommendations

 Power Distribution: 
- Use star-point grounding for analog and digital sections
- Implement separate power planes for VCC and GND
- Place 0.1μF decoupling capacitors within 5mm of each VCC pin

 Signal Routing: 
- Maintain consistent 50Ω impedance for high-speed traces
- Route critical signals (clock, enable) with minimal length matching
- Avoid crossing power plane splits with high-speed signals

 Thermal Management: 
- Provide adequate copper pour for heat dissipation
- Consider thermal vias under the package for improved cooling
- Ensure proper airflow in high-density layouts

## 3. Technical Specifications

### Key Parameter Explanations

 Absolute Maximum Ratings: 
- Supply Voltage (VCC): -0.5V to +4.6V
- Input

Alternative Part Number

  • SN74LVC16841DL --: Same 20-bit bus-interface D-type latch function with 3-state outputs, LVC family offers comparable low-voltage performance and is a common drop-in replacement.
  • 74LVC16841ADGG --: Equivalent 20-bit D-type latch in the LVC logic family with similar voltage range and drive characteristics, widely available alternative.
  • MC74LCX16841DT --: Directly comparable LCX-family 20-bit latch with 3-state outputs, matching the original low-voltage CMOS logic specifications.
  • SN74LVC16841DGGR --: Same 20-bit universal bus transceiver function with 3-state outputs in a similar TSSOP package; LVC family is a close electrical match to LCX and widely available.
  • 74LVC16841APAG --: Direct functional equivalent 20-bit bus interface register/transceiver with 3-state outputs, low-voltage CMOS logic compatible with the original LCX device.

Request Quotation

For immediate assistance, call us at +86 533 2716050 or email [email protected]

Part Number Quantity Target Price($USD) Email Contact Person
We offer highly competitive channel pricing. Get in touch for details.

Specializes in hard-to-find components chips