IC Phoenix logo

Home ›  7  › 720 > 74LCXH16244MTD

74LCXH16244MTD from FSC,Fairchild Semiconductor

Fast Delivery, Competitive Price @IC-phoenix

If you need more electronic components or better pricing, we welcome any inquiry.

74LCXH16244MTD

Manufacturer: FSC, FAI

Low Voltage 16-Bit Buffer/Line Driver with Bushold

Partnumber Manufacturer Quantity Availability
74LCXH16244MTD FSC, FAI 698 In Stock

Description and Introduction

Low Voltage 16-Bit Buffer/Line Driver with Bushold The 74LCXH16244MTD is a low-voltage CMOS 16-bit buffer/line driver with 5V tolerant inputs and outputs. It is manufactured by ON Semiconductor. The device operates at a voltage range of 2.0V to 3.6V, making it suitable for low-voltage applications. It features non-inverting outputs and is designed with 16-bit buffers with 3-state outputs. The 74LCXH16244MTD is available in a TSSOP-48 package and is RoHS compliant. It is typically used in applications requiring high-speed, low-power operation, such as in bus interface and memory address driving. The device is characterized for operation from -40°C to +85°C.

Application Scenarios & Design Considerations

Low Voltage 16-Bit Buffer/Line Driver with Bushold# Technical Documentation: 74LCXH16244MTD Low-Voltage 16-Bit Buffer/Line Driver

 Manufacturer : FSC (Fairchild Semiconductor)

---

## 1. Application Scenarios

### Typical Use Cases
The 74LCXH16244MTD serves as a high-performance 16-bit buffer and line driver designed for low-voltage applications. Its primary function is to provide signal buffering, isolation, and driving capability in digital systems.

 Memory Interface Buffering : Frequently deployed as an interface buffer between microprocessors and memory modules (DDR, SRAM, Flash). The device's 5V tolerant inputs allow it to bridge voltage domains between 3.3V processors and 5V legacy memory systems while maintaining signal integrity.

 Bus Driving and Isolation : Essential in multi-drop bus architectures where multiple devices share common data/address lines. The 74LCXH16244MTD provides necessary drive strength (24mA output current) while preventing back-feeding and signal degradation across long PCB traces or cable connections.

 Backplane Driving : In telecommunications and networking equipment, this component drives signals across backplanes where capacitive loading can exceed 50pF. The balanced propagation delays (typically 3.5ns) ensure synchronous operation across multiple cards.

### Industry Applications

 Telecommunications Infrastructure : Used in router line cards, base station controllers, and switching equipment where reliable signal transmission across multiple boards is critical. The device's low noise generation makes it suitable for sensitive RF control interfaces.

 Automotive Electronics : Employed in infotainment systems, body control modules, and advanced driver assistance systems (ADAS). The extended temperature range (-40°C to +85°C) ensures reliable operation in harsh automotive environments.

 Industrial Control Systems : Interfaces between programmable logic controllers (PLCs) and peripheral devices, sensor arrays, and actuator networks. The 5V tolerance allows compatibility with legacy industrial sensors while operating from modern 3.3V logic supplies.

 Consumer Electronics : Found in gaming consoles, smart TVs, and set-top boxes where it buffers high-speed memory interfaces and display controller signals.

### Practical Advantages and Limitations

 Advantages: 
-  Low Power Consumption : ICC typically 10μA (static) due to CMOS technology
-  High-Speed Operation : tPD = 3.5ns max at 3.3V VCC
-  5V Tolerant Inputs : Allows mixed-voltage system design without additional level shifters
-  Live Insertion Capability : Supports hot-swapping in redundant systems
-  Balanced Outputs : Minimizes ground bounce and simultaneous switching noise

 Limitations: 
-  Limited Drive Capability : Maximum 24mA output current may require additional drivers for high-current applications
-  Propagation Delay Accumulation : In daisy-chained configurations, cumulative delays may affect timing margins
-  Power Sequencing Requirements : Inputs must not exceed VCC during power-up to prevent latch-up

---

## 2. Design Considerations

### Common Design Pitfalls and Solutions

 Simultaneous Switching Noise (SSN) 
-  Problem : Multiple outputs switching simultaneously can cause ground bounce exceeding 500mV
-  Solution : Implement dedicated ground pins, use bypass capacitors (0.1μF ceramic close to each VCC/GND pair), and stagger critical signal timing

 Signal Integrity Degradation 
-  Problem : Ringing and overshoot on long transmission lines
-  Solution : Series termination resistors (22-33Ω) near driver outputs, controlled impedance PCB routing

 Power Supply Sequencing 
-  Problem : Input signals applied before VCC stabilization can cause excessive current draw
-  Solution : Implement power-on reset circuits or use devices with power-up 3-state protection

### Compatibility Issues with Other Components

 Mixed Voltage Level Interfacing 
- The 74LCXH16244

Alternative Part Number

  • SN74LVC16244ADGGR --: 16-bit buffer/driver with 3-state outputs in the same 48-pin TSSOP package; LVC family is a close functional and electrical match to LCXH, widely available and pin-compatible.
  • MC74LCX16244DTG --: Direct LCX-family 16-bit buffer with 3-state outputs in TSSOP-48; same logic function and bus-hold behavior, making it a strong drop-in alternative.
  • 74LVC16244APAG --: 16-bit non-inverting buffer with 3-state outputs in TSSOP-48; LVC series offers comparable speed and drive, suitable when LCXH parts are unavailable.
  • 74VCX16244MTD --: VCX-family 16-bit buffer/driver with similar speed and drive characteristics; pin-compatible TSSOP option for level-shifting buffer applications.

Request Quotation

For immediate assistance, call us at +86 533 2716050 or email [email protected]

Part Number Quantity Target Price($USD) Email Contact Person
We offer highly competitive channel pricing. Get in touch for details.

Specializes in hard-to-find components chips