IC Phoenix logo

Home ›  7  › 720 > 74LCXH2245

74LCXH2245 from FAI,Fairchild Semiconductor

Fast Delivery, Competitive Price @IC-phoenix

If you need more electronic components or better pricing, we welcome any inquiry.

74LCXH2245

Manufacturer: FAI, FAIRCHILD

Low Voltage Bidirectional Transceiver with Bushold and 26-Ohm Series Resistors in B Outputs

Partnumber Manufacturer Quantity Availability
74LCXH2245 FAI, FAIRCHILD 834 In Stock

Description and Introduction

Low Voltage Bidirectional Transceiver with Bushold and 26-Ohm Series Resistors in B Outputs The 74LCXH2245 is a low-voltage CMOS octal bus transceiver manufactured by Fairchild Semiconductor. It is designed for 2.7V to 3.6V VCC operation and features non-inverting 3-state outputs. The device is capable of both transmitting and receiving data between buses, with separate control inputs for enabling the outputs in either direction. It supports bidirectional data flow and is compatible with TTL levels. The 74LCXH2245 is characterized for operation from -40°C to 85°C and is available in various package types, including TSSOP and SOIC. It is designed to provide high-speed performance while maintaining low power consumption, making it suitable for portable and battery-operated applications.

Application Scenarios & Design Considerations

Low Voltage Bidirectional Transceiver with Bushold and 26-Ohm Series Resistors in B Outputs# 74LCXH2245 Technical Documentation

## 1. Application Scenarios

### Typical Use Cases
The 74LCXH2245 is an 8-bit bidirectional transceiver with 3-state outputs, primarily used for  asynchronous communication  between data buses. Key applications include:

-  Bus Interface Systems : Enables bidirectional data transfer between microprocessors and peripheral devices
-  Memory Buffer Systems : Provides temporary storage and signal conditioning between memory modules and processing units
-  Hot-Swap Applications : Supports live insertion/removal in backplane systems due to power-off protection
-  Level Translation : Converts between 3.3V and 5V systems while maintaining signal integrity
-  Data Path Isolation : Allows multiple devices to share common bus lines without interference

### Industry Applications
-  Telecommunications Equipment : Used in router backplanes and switching systems
-  Industrial Control Systems : PLC interfaces and sensor networks
-  Automotive Electronics : Infotainment systems and body control modules
-  Consumer Electronics : Gaming consoles, smart TVs, and set-top boxes
-  Medical Devices : Patient monitoring equipment and diagnostic systems

### Practical Advantages and Limitations

 Advantages: 
-  Low Power Consumption : Typical ICC of 10μA (static) makes it ideal for battery-powered devices
-  High-Speed Operation : 5.0ns maximum propagation delay supports high-frequency applications
-  5V Tolerant Inputs : Allows direct interface with legacy 5V systems
-  Live Insertion Capability : Built-in power-up/power-down protection
-  Low Noise Generation : 24mA output drive with controlled edge rates

 Limitations: 
-  Limited Drive Capability : Maximum 24mA output current may require buffers for high-load applications
-  Temperature Range : Commercial grade (0°C to +70°C) limits use in extreme environments
-  ESD Sensitivity : Requires proper handling procedures (2kV HBM)

## 2. Design Considerations

### Common Design Pitfalls and Solutions

 Pitfall 1: Improper Direction Control Timing 
-  Issue : Glitches during direction switching causing bus contention
-  Solution : Implement direction control sequencing with proper timing margins

 Pitfall 2: Insufficient Decoupling 
-  Issue : Power supply noise affecting signal integrity
-  Solution : Use 0.1μF ceramic capacitors placed within 0.5cm of VCC pins

 Pitfall 3: Unused Input Handling 
-  Issue : Floating inputs causing excessive power consumption
-  Solution : Tie unused control inputs (DIR, OE) to appropriate logic levels

### Compatibility Issues

 Voltage Level Compatibility: 
-  3.3V Systems : Direct compatibility with LVCMOS/LVTTL
-  5V Systems : Inputs are 5V tolerant, outputs require pull-up for 5V compatibility
-  Mixed Voltage Systems : Requires careful consideration of VIH/VIL thresholds

 Timing Constraints: 
- Maximum propagation delay: 5.0ns @ 3.3V, 25°C
- Setup/hold times must be verified with target microcontroller specifications

### PCB Layout Recommendations

 Power Distribution: 
- Use star-point grounding for analog and digital sections
- Implement separate power planes for VCC and GND
- Place decoupling capacitors (0.1μF) adjacent to each VCC pin

 Signal Routing: 
- Maintain consistent 50Ω impedance for high-speed traces
- Route DIR and OE control signals away from clock lines
- Use matched trace lengths for bus signals to minimize skew

 Thermal Management: 
- Provide adequate copper pour for heat dissipation
- Consider thermal vias for high-density layouts
- Maintain minimum 2mm clearance from heat-generating components

## 3. Technical

Alternative Part Number

  • MC74LCX245ADWG --: Same LCX-family octal bus transceiver with 5V-tolerant inputs; the 'H' variant's bus-hold feature is the main difference, so verify hold requirements before substitution.
  • SN74LVC245APW --: LVC-family octal bus transceiver in TSSOP with 3.3V operation and 5V-tolerant inputs; widely available and functionally similar, though bus-hold is not included.
  • 74LVC245APW --: Standard LVC octal bus transceiver with 3.3V supply and 5V-tolerant I/O; a common drop-in style alternative when bus-hold is not required.

Request Quotation

For immediate assistance, call us at +86 533 2716050 or email [email protected]

Part Number Quantity Target Price($USD) Email Contact Person
We offer highly competitive channel pricing. Get in touch for details.

Specializes in hard-to-find components chips