Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface The LM75CIM3 is a digital temperature sensor and thermal watchdog manufactured by National Semiconductor (NSC). Below are its specifications, descriptions, and features:
### **Specifications:**
- **Manufacturer:** National Semiconductor (NSC)  
- **Package:** SOT-23-5  
- **Operating Voltage Range:** 2.8V to 5.5V  
- **Temperature Range:** -55°C to +125°C  
- **Accuracy:** ±2°C (from -25°C to +100°C)  
- **Resolution:** 9 to 12 bits (programmable)  
- **Interface:** I²C-compatible (supports up to 400kHz)  
- **Power Consumption:**  
  - Operating: 250µA (typical)  
  - Shutdown: 3.5µA (typical)  
- **OS (Overtemperature Shutdown) Output:** Open-drain, active-low  
- **Address Pins:** 3 (supports up to 8 devices on the same bus)  
### **Descriptions:**
- The LM75CIM3 is a digital temperature sensor with an integrated ΔΣ analog-to-digital converter (ADC).  
- It provides temperature readings in a digital format via the I²C interface.  
- It includes an overtemperature detection function with programmable thresholds (TOS and THYST).  
- The device can be configured for different operation modes (shutdown, comparator, or interrupt mode).  
### **Features:**
- **Digital Output:** Eliminates the need for external calibration.  
- **Programmable Thresholds:** Configurable overtemperature trip point (TOS) and hysteresis (THYST).  
- **Low Power Consumption:** Suitable for battery-powered applications.  
- **Small Form Factor:** SOT-23-5 package for space-constrained designs.  
- **Thermal Shutdown Protection:** Open-drain OS output for system protection.  
- **Wide Supply Range:** Operates from 2.8V to 5.5V, compatible with 3.3V and 5V systems.  
This information is strictly based on the manufacturer's datasheet.