IC Phoenix logo

Home ›  L  › L53 > LMP2014MT

LMP2014MT from NSC,National Semiconductor

Fast Delivery, Competitive Price @IC-phoenix

If you need more electronic components or better pricing, we welcome any inquiry.

LMP2014MT

Manufacturer: NSC, NS

Quad, High Precision, Rail-to-Rail Output Operational Amplifier

Partnumber Manufacturer Quantity Availability
LMP2014MT NSC, NS 2692 In Stock

Description and Introduction

Quad, High Precision, Rail-to-Rail Output Operational Amplifier The LMP2014MT is a precision operational amplifier manufactured by NSC (National Semiconductor Corporation). Below are the factual specifications, descriptions, and features from Ic-phoenix technical data files:  

### **Specifications:**  
- **Manufacturer:** NSC (National Semiconductor Corporation)  
- **Type:** Precision Operational Amplifier  
- **Number of Channels:** 4  
- **Supply Voltage Range:** ±1.35V to ±5.5V (Dual Supply), 2.7V to 11V (Single Supply)  
- **Input Offset Voltage:** 150µV (Max)  
- **Input Bias Current:** 0.5pA (Typ)  
- **Gain Bandwidth Product (GBW):** 1.7MHz  
- **Slew Rate:** 0.7V/µs  
- **Operating Temperature Range:** -40°C to +125°C  
- **Package:** TSSOP-14  

### **Descriptions:**  
- The LMP2014MT is a quad-channel, low-power, precision CMOS operational amplifier.  
- It is designed for applications requiring high precision, low noise, and low power consumption.  
- Features rail-to-rail input and output operation.  

### **Features:**  
- **Low Offset Voltage:** 150µV (Max)  
- **Low Input Bias Current:** 0.5pA (Typ)  
- **Low Noise:** 12nV/√Hz at 1kHz  
- **Rail-to-Rail Input and Output**  
- **Low Power Consumption:** 500µA per channel (Typ)  
- **Wide Supply Range:** 2.7V to 11V  
- **High PSRR (Power Supply Rejection Ratio):** 120dB  
- **High CMRR (Common-Mode Rejection Ratio):** 120dB  

This information is based solely on the manufacturer's datasheet and specifications.

Application Scenarios & Design Considerations

Quad, High Precision, Rail-to-Rail Output Operational Amplifier# Technical Documentation: LMP2014MT Precision Operational Amplifier

## 1. Application Scenarios

### 1.1 Typical Use Cases
The LMP2014MT is a precision CMOS operational amplifier designed for applications requiring high accuracy, low noise, and low power consumption. Its primary use cases include:

-  High-Impedance Sensor Interfaces : The device's ultra-low input bias current (0.5 pA typical) makes it ideal for pH electrodes, photodiode transimpedance amplifiers, and piezoelectric sensors where signal source impedance exceeds 1 MΩ.

-  Precision Instrumentation Amplifiers : When configured in instrumentation amplifier topologies, the LMP2014MT provides excellent common-mode rejection (120 dB typical) and low offset voltage (75 µV maximum), suitable for medical instrumentation and industrial measurement systems.

-  Active Filter Circuits : With a gain-bandwidth product of 3 MHz and low distortion (0.0005% THD+N), the amplifier performs well in anti-aliasing filters, audio processing circuits, and signal conditioning stages.

-  Low-Power Data Acquisition Systems : The combination of rail-to-rail input/output operation and 1.45 mA typical supply current enables battery-powered operation in portable measurement equipment and remote monitoring systems.

### 1.2 Industry Applications

#### Medical Electronics
-  Patient Monitoring : ECG, EEG, and EMG front-end amplifiers benefit from the device's low noise (7.5 nV/√Hz) and high CMRR.
-  Portable Diagnostic Equipment : Glucose meters, pulse oximeters, and portable ultrasound systems utilize the amplifier's precision and low-power characteristics.
-  Implantable Devices : The extended temperature range (-40°C to +125°C) and small package (TSSOP-14) support medical implants with stringent size and reliability requirements.

#### Industrial Automation
-  Process Control : 4-20 mA current loop transmitters, temperature controllers, and pressure transmitters employ the LMP2014MT for its precision and industrial temperature range.
-  Test and Measurement : Digital multimeters, data loggers, and calibration equipment leverage the amplifier's low offset voltage drift (0.5 µV/°C typical).
-  Motor Control : Current sensing circuits in servo drives and robotics benefit from the rail-to-rail output swing and fast settling time (1.5 µs to 0.01%).

#### Automotive Systems
-  Sensor Conditioning : Engine management sensors (MAP, MAF), exhaust gas sensors, and battery management systems utilize the device's automotive temperature range and EMI robustness.
-  Safety Systems : Airbag deployment sensors and tire pressure monitoring systems benefit from the amplifier's reliability and precision.

#### Consumer Electronics
-  Professional Audio : Microphone preamplifiers and equalization circuits use the low-noise characteristics.
-  Wearable Devices : Fitness trackers and smartwatches benefit from the low-power operation and small footprint.

### 1.3 Practical Advantages and Limitations

#### Advantages
-  Precision Performance : Low offset voltage (75 µV max), low offset drift (0.5 µV/°C typ), and high open-loop gain (130 dB typ) enable accurate signal processing.
-  Low Power Consumption : 1.45 mA typical supply current per amplifier supports battery-operated applications.
-  Rail-to-Rail Operation : Input common-mode range extends 200 mV beyond both supply rails; output swings within 50 mV of supply rails.
-  EMI Hardened Design : Internal RFI filters reduce susceptibility to electromagnetic interference.
-  Extended Temperature Range : Full operation from -40°C to +125°C ensures reliability in harsh environments.

#### Limitations
-  Limited Bandwidth : 3 MHz gain-bandwidth product restricts high-frequency applications above 300 kHz for gains >10.
-  Moderate Slew Rate : 1.5 V/µs

Alternative Part Number

  • OPA333AIDBVR --: Zero-drift, low-offset CMOS op-amp in SOT-23-5, functionally similar to the LMP2014 with very low offset voltage and low noise.
  • AD8628ARTZ-REEL7 --: Zero-drift, rail-to-rail op-amp in SOT-23-5 offering comparable low offset and low bias current, suitable as a direct functional replacement.
  • MCP6V01T-E/OT --: Zero-drift op-amp in SOT-23-5 with low offset voltage and rail-to-rail output, a cost-effective alternative for precision sensing applications.

Request Quotation

For immediate assistance, call us at +86 533 2716050 or email [email protected]

Part Number Quantity Target Price($USD) Email Contact Person
We offer highly competitive channel pricing. Get in touch for details.

Specializes in hard-to-find components chips