Single LinCMOS(TM) Rail-To-Rail uPower Operational Amplifier The TLV2711CDBVRG4 is a single operational amplifier (op-amp) manufactured by Texas Instruments (TI). Below are its specifications, descriptions, and features based on factual information from Ic-phoenix technical data files:
### **Specifications:**
- **Manufacturer:** Texas Instruments (TI)  
- **Part Number:** TLV2711CDBVRG4  
- **Type:** Single Operational Amplifier (Op-Amp)  
- **Supply Voltage Range:** 2.7V to 16V  
- **Input Offset Voltage (Typical):** 0.5 mV  
- **Input Bias Current (Typical):** 1 pA  
- **Gain Bandwidth Product (GBWP):** 3 MHz  
- **Slew Rate:** 2.4 V/µs  
- **Quiescent Current (Per Channel):** 550 µA  
- **Operating Temperature Range:** -40°C to +125°C  
- **Package:** SOT-23-5 (DBV)  
- **Rail-to-Rail Input/Output:** No (Input includes negative rail, output is rail-to-rail)  
### **Descriptions:**
- The TLV2711CDBVRG4 is a low-voltage, low-power operational amplifier designed for general-purpose applications.  
- It is optimized for battery-powered and portable devices due to its low quiescent current.  
- The device provides good speed-power tradeoff with a 3 MHz bandwidth and 2.4 V/µs slew rate.  
- It is part of TI's TLV27xx family, which offers improved performance over older CMOS op-amps.  
### **Features:**
- **Low Power Consumption:** 550 µA per amplifier (typical).  
- **Wide Supply Range:** Operates from 2.7V to 16V.  
- **Low Input Offset Voltage:** 0.5 mV (typical).  
- **High Input Impedance:** CMOS input stage with very low bias current (1 pA typical).  
- **Output Swing:** Rail-to-rail output for maximum dynamic range.  
- **Stable Operation:** Unity-gain stable with capacitive loads up to 100 pF.  
- **ESD Protection:** ±2000 V Human Body Model (HBM).  
- **Applications:** Sensor interfaces, battery-powered systems, signal conditioning, and portable electronics.  
This information is based solely on the manufacturer's datasheet and product documentation.