8M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI The W25Q80BVDAIG is a serial flash memory device manufactured by Winbond. Below are its specifications, descriptions, and features based on factual information:
### **Specifications:**
- **Memory Size:** 8M-bit (1M-byte)
- **Interface:** Serial Peripheral Interface (SPI)
- **Operating Voltage:** 2.7V – 3.6V
- **Speed:**
- Clock frequency up to 104 MHz (Fast Read)
- Dual and Quad SPI support for higher throughput
- **Sector Size:** 4KB (uniform)
- **Block Size:** 32KB and 64KB (erasable)
- **Page Size:** 256 bytes (programmable)
- **Endurance:** 100,000 program/erase cycles per sector
- **Data Retention:** 20 years
- **Operating Temperature Range:** -40°C to +85°C (industrial grade)
- **Package:** 8-pin SOIC (150mil)
### **Descriptions:**
- The W25Q80BVDAIG is a cost-effective, high-performance flash memory solution for embedded systems.
- It supports standard SPI, Dual SPI, and Quad SPI modes for flexible data transfer.
- Features a **Write Protection** mechanism with software and hardware controls.
- Includes a **Unique 64-bit ID** for device identification.
### **Features:**
- **SPI Modes:** Supports Mode 0 and Mode 3.
- **Fast Program & Erase:**
- Page Program (256 bytes) in 1.2ms (typical)
- Sector Erase (4KB) in 60ms (typical)
- Chip Erase in 30s (typical)
- **Low Power Consumption:**
- Active read current: 4mA (typical at 104MHz)
- Deep Power-Down mode: 1μA (typical)
- **Security Features:**
- Software and hardware write protection
- OTP (One-Time Programmable) security register
- **Reliability:**
- ECC (Error Correction Code) internally managed
- Wear-leveling support for extended lifespan
This information is based solely on Winbond's official documentation for the W25Q80BVDAIG.
