MAX2135AETN+ ,ISDB-T/DVB-T Diversity Tuner MAX2135A RELIABILITY REPORT FOR MAX2135AETN+ PLASTIC ENCAPSULATED DEVICES March ..
MAX2135AETN+ ,ISDB-T/DVB-T Diversity Tuner MAX2135A RELIABILITY REPORT FOR MAX2135AETN+ PLASTIC ENCAPSULATED DEVICES March ..
MAX2135AETN+T ,ISDB-T/DVB-T Diversity TunerTable of Contents 3 Introduction 4 Infotainment 4 Power Management for Infotainment 6 Display ..
MAX213CAI ,+5V RS-232 Transceivers with 0.1uF External CapacitorsGeneral Description
The MAX200-MAX211/MAX213 transceivers are designed
for RS-232 and V.28 comm ..
MAX213CAI+ ,+5V, RS-232 Transceivers with 0.1µF External CapacitorsElectrical Characteristics(MAX202/MAX204/MAX206/MAX208/MAX211/MAX213: V = +5V ±10%; MAX200/MAX203/M ..
MAX213CAI+T ,+5V, RS-232 Transceivers with 0.1µF External Capacitorsapplications with limited circuit board space. 12+16V 0.1µFC2-+16V+5VBeneits and
MAX5250ACPP ,Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial InterfaceGeneral Description __________
MAX5250AEAP ,Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial InterfaceApplicationsMAX5250ACPP 0°C to +70°C 20 Plastic DIP ±1/2Digital Offset and Gain AdjustmentMAX5250BC ..
MAX5250BCAP ,Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial InterfaceFeaturesThe +5V MAX5250 combines four low-power, voltage- ' Four 10-Bit DACs with Configurable outp ..
MAX5250BEAP ,Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial InterfaceELECTRICAL CHARACTERISTICS(V = +5V ±10%, AGND = DGND = 0V, REFAB = REFCD = 2.5V, R = 5kΩ, C = 100pF ..
MAX5250BEAP ,Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial InterfaceMAX525019-1171; Rev 0; 12/96Low-Power, Quad, 10-Bit Voltage-Output DACwith Serial Interface________ ..
MAX5250BEAP+ ,Low-Power, Quad, 10-Bit Voltage-Output DAC with Serial InterfaceELECTRICAL CHARACTERISTICS(V = +5V ±10%, AGND = DGND = 0V, REFAB = REFCD = 2.5V, R = 5kΩ , C = 100p ..
MAX2135AETN+
ISDB-T/DVB-T Diversity Tuner
MAX2135A RELIABILITY REPORT
FOR
MAX2135AETN+
PLASTIC ENCAPSULATED DEVICES March 04, 2011
MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR.
SUNNYVALE, CA 94086
Approved byDon Lipps
Quality Assurance
Manager, Reliability Engineering
MAX2135AConclusion The MAX2135AETN+ successfully meets the quality and reliability standards required of all Maxim products. In addition, Maxim’s
continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim’s quality and reliability standards.
Table of Contents I. ........Device Description IV. .......Die Information II. ........Manufacturing Information V. ........Quality Assurance Information III. .......Packaging Information VI. .......Reliability Evaluation .....Attachments I. Device Description A. General
The MAX2135A low-power, 6MHz ISDB-T and 6MHz/7MHz/8MHz DVB-T low-IF diversity tuner directly converts broadcast ISDB-T and DVB-T signals
to a low-IF using a broadband I/Q downconverter. The operating frequency range covers the VHF and UHF broadcast TV bands from 90MHz to
862MHz. The MAX2135A integrates LNAs, RF variable-gain amplifiers (VGAs), VHF and UHF tracking filters, I/Q downconverting mixers, baseband
VGAs, and low-IF filters. The device also includes a fully monolithic VCO and tank circuit as well as a complete frequency synthesizer including an
on-chip crystal oscillator and output buffer/divider. The device incorporates a 2-wire (I²C) serial control interface with multiple read and write
addresses. A low-power standby mode is available whereupon the signal path is shut down while leaving the serial control interface and register
circuits active. Additionally, the entire device can be shut down by an external pin. The MAX2135A is available in a 56-pin thin QFN package (7mm x
7mm) with an exposed paddle. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range.
MAX2135A II. Manufacturing Information A. Description/Function: ISDB-T/DVB-T Diversity Tuner
B. Process: MB3
C. Number of Device Transistors: 68633
D. Fabrication Location: California
E. Assembly Location: Thailand
F. Date of Initial Production: January 10, 2010
III. Packaging Information A. Package Type: 56-pin TQFN 7x7
B. Lead Frame: Copper
C. Lead Finish: 100% matte Tin
D. Die Attach: Conductive
E. Bondwire: Au (1 mil dia.)
F. Mold Material: Epoxy with silica filler
G. Assembly Diagram: #05-9000-3373
H. Flammability Rating: Class UL94-V0 I. Classification of Moisture Sensitivity per
JEDEC standard J-STD-020-C Level 1 J. Single Layer Theta Ja: 36°C/W
K. Single Layer Theta Jc: 1°C/W
L. Multi Layer Theta Ja: 25°C/W
M. Multi Layer Theta Jc: 1°C/W
IV. Die Information A. Dimensions: 146.85 X 144.49 mils
B. Passivation: BCB
C. Interconnect: Al with top layer 100% Cu
D. Backside Metallization: None
E. Minimum Metal Width: 0.35µm F.
Minimum Metal Spacing: 0.35µm
G. Bondpad Dimensions: 5 mil. Sq.
H. Isolation Dielectric: SiO2
I. Die Separation Method: Wafer Saw
MAX2135A= ___1___ = _______1.83_______ (Chi square value for MTTF upper limit)
MTTF 192 x 4340 x 96 x 2
(where 4340 = Temperature Acceleration factor assuming an activation energy of 0.8eV)
V. Quality Assurance Information A. Quality Assurance Contacts: Ken Wendel (Director, Reliability Engineering)
Bryan Preeshl (Managing Director of QA) B. Outgoing Inspection Level: 0.1% for all electrical parameters guaranteed by the Datasheet.
0.1% For all Visual Defects. C. Observed Outgoing Defect Rate: < 50 ppm
D. Sampling Plan: Mil-Std-105D
VI. Reliability Evaluation A. Accelerated Life Test
The results of the 135°C biased (static) life test are shown in Table 1. Using these results, the Failure Rate ( ) is calculated as follows:
= 11.5 x 10-9 = 11.5 F.I.T. (60% confidence level @ 25°C)
The following failure rate represents data collected from Maxim’s reliability monitor program. Maxim performs quarterly life test
monitors on its processes. This data is published in the Reliability Report found at http:///qa/reliability/monitor.
Cumulative monitor data for the MB3 Process results in a FIT Rate of 0.08 @ 25C and 1.33 @ 55C (0.8 eV, 60% UCL) B. Moisture Resistance Tests The industry standard 85°C/85%RH or HAST testing is monitored per device process once a quarter. C. E.S.D. and Latch-Up Testing The WG53-1 die type has been found to have all pins able to withstand a HBM transient pulse of +/-2500V per JEDEC
JESD22-A114. Latch-Up testing has shown that this device withstands a current of +/-250mA.
MAX2135ATable 1 Reliability Evaluation Test Results
MAX2135AETN+
TEST ITEM TEST CONDITION FAILURE
IDENTIFICATION
SAMPLE SIZE NUMBER OF
FAILURES
Static Life Test (Note 1) Ta = 135°C
Biased
Time = 192 hrs.
DC Parameters
& functionality
96 0
Moisture Testing (Note 2) HAST Ta = 130°C
RH = 85%
Biased
Time = 96hrs.
DC Parameters
& functionality
77 0
Mechanical Stress (Note 2)
Temperature
Cycle
-65°C/150°C
1000 Cycles
Method 1010
DC Parameters
& functionality
77 0
Note 1: Life Test Data may represent plastic DIP qualification lots.
Note 2: Generic Package/Process data
This datasheet has been :
www.ic-phoenix.com
Datasheets for electronic components.
